Personal Info |
Rankings |
|
First Name : Johnny Sex : Man Status : Single, without children Birthday : 15 May 1986 (37 ) Area : Unknown |
|
|
A few words |
||
How to clean HEPA filter for your vacuum cleaner
There are many best vacuum in the world with many features and one of the most noticeable ones is HEPA filter. It is an extremely important part of a vacuum cleaner, it helps to trap particles from 0.3 micron and larger therefore benefit your health by limiting any pet dander and many other microscopic allergens hiding around your house, also deodorizing your living. All that will be so wonderful if you can make it use to its fullness by cleaning it the right way. So what is the right way to clean your HEPA filter?
How to know your vacuum cleaner’s type of HEPA filter?
There are two types of HEPA filter: the Washable and Non-washable.
The Non-washable HEPA filter
With this filter, you must replace the filter according to the instructions specified by the vacuum cleaner manufacturer. Normally, the replacement time depends on the frequency of use of the machine, fast, 1 year or if rarely used, about 2 years. It is recommended to replace the filter to make the machine work effectively.
The Washable HEPA filter
With a washable HEPA filter, regular cleaning of the filter is very important. Not only to maintain the efficiency of air and dust filtration, but also to prolong the life of the filter. Periodic time to clean this filter is every 2 to 3 months.
How to clean your HEPA filter?
Even with the top rated vacuum cleaners, if you don’t handle it well, it won’t do its job as it should be. So how to clean it the right way?
Choose the right location
Choose a well-ventilated location to remove the filters and clean them, to avoid creating conditions for mold, bacteria, etc. to re-infiltrate and get stuck back into the living space when removing and cleaning the filter.
Open the cover and remove the HEPA filter
Use your hand to gently open and remove the HEPA filter.
Filter dust
Use handheld vacuums or soft bristle brushes to gently remove dirt from the filter.
Gently rinse the filter under the tap
After vacuuming the filter, wet a towel in water and clean the HEPA filter. For stubborn dust that is difficult to clean on the filter, use a tap with gentle pressure to clean the filter, then use a soft cloth or brush to scrub those stains.
Please note:
- Never immerse HEPA filters in water, nor wash them in the washing machine or apply strong force to the filter, as it can cause the filter’s pre-woven structure to loosen and reduce the efficiency of air filtration.
- Do not use strong detergents as they may shorten the life of the filter.
Let the filter dry
It needs to be dried for 1 to 4 hours in the sun with UV rays to kill the remaining bacteria on the filter. If there’s lack of sunlight, you can use a soft towel to moisten the filter and use a hair dryer on the lightest setting.
Install the filter back on the machine
The operation needs to be gentle and precise, and install the reverse order of the steps when removing the filter. Avoid installing it in the wrong direction.
LAST FEW WORDS
Cleaning objects designed to clean is an ironic chore, but if you don’t do it, The Best Vacuum Cleaner will go to waste. And HEPA filter is one the the most important parts that you should pay attention closely to in maintaining it. |